Colloidal Silver Generator

Is Colloidal Silver Harmful to the Liver?

admin — Mon, 19 Mar 2012 11:32:40 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. Is Colloidal Silver Harmful to the Liver? - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

Is Colloidal Silver Harmful to the Liver? If you have an interest in obtaining a colloidal silver generator that you may use to create colloidal silver products that will be used to optimize your health, it is likely that you have several questions about the substance. This is actually a given. After all, if you want to ensure that you are as healthy as possible, you will want to ensure that the steps that you take to optimize your health will not end up damaging your physical well-being in the end. One of the most common questions that we receive when a person wants to purchase a colloidal silver generator to create health products is if the colloidal silver will result in harm to the liver. In short, the answer is “no”. According to research, silver is considered to be one of the most effective agents in fighting off potentially harmful agents such as bacteria and viruses. In this guide, you will be introduced to the benefits that you will experience by harnessing the power of a colloidal silver generator. Colloidal Silver Explained In order to understand why colloidal silver is not harmful to the liver, you must first understand the basics. A colloidal silver generator creates small particles of silver from pulling them from a large chunk of silver. It occurs as a result of a process that is electromagnetic in nature. Once the large piece of silver is placed in the water, small sections of the silver in micron range are suspended in the water through an electrical based charge that occurs on each atom. When used in the body, the colloidal silver particles are then able to travel through the body effectively. Once the substance is traveling throughout the body, it has the ability to eliminate well over six hundred fifty different pathogens that have the ability to cause diseases, disorders and other types of illnesses. Many specialists that practice medicine – both professionally and homeopathic medicine – refer to this product as the most effective natural antibiotic. General Safety If you are interested in creating health products with a colloidal silver generator, it is important that you know some basic information about the safety of colloidal silver. According to most studies, it is considered to be a non-toxic product that does not result in addiction. Unlike other substances, the body does not develop a tolerance to the product. In addition to this, most studies indicate that, when the substance is taken in moderation, it does not harm the organs in the body – specifically, the liver and the kidneys. However, there are some studies that suggest that if colloidal silver is taken in excessive doses, it could harm the body. However, there are no long term studies that have concluded this fact with absolutely certainty. If you want to strengthen your body’s defense system and optimize your health, using a colloidal silver generator and the colloidal [...]

The SilverLungs (pH) colloidal silver generator is designed around custom internal circuitry and mechanics to insure that only the highest quality silver solutions are produced every time. The unit features very large 7 gauge silver electrodes which greatly increase the "silver to water ratio". These large electrodes help to extend their life span and also help to produce very small and consistent particle sizes. Colloidal Silver Generator - The SilverLungs (pH) colloidal silver generator is a premium product based on years of development and dedicated research into dissolving pure silver ions and introducing silver particles into highly purified water and is one of the easiest to use silver generating products available today.

How Colloids Are Used in Food and Medicine

admin — Sun, 18 Mar 2012 11:31:33 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. How Colloids Are Used in Food and Medicine - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

How Colloids Are Used in Food and Medicine If you are interested in utilizing a colloidal silver generator in order to create colloidal silver in foods and as medications to optimize your health, it is essential to understand a bit about the silver – in general. During ancient times, the Greeks and the Romans made an amazing discovery – that liquids would retain a high level of freshness for extended periods of time when they were stored in containers that were created from silver. The pioneers in American history would often place silver dollars within the jugs that they used to store milk in so that the liquid would not spoil as quickly. In the late part of the 1800s, scientists discovered that silver was considered to be an effective agent in combatting potentially threatening germs. During the 20th Century, researchers discovered that the fluids in the body – such as blood – were colloidal in nature, meaning that they were extremely fine, suspended particles. As a result of all of these discoveries, it is not at all surprising that colloidal silver created from a colloidal silver generator is considered to be beneficial to the health. Why is Colloidal Silver Used in Foods and Medications? According to research conducted on colloidal silver, it has been established that it is an effective and natural antibiotic. While it has been used for – literally – thousands upon thousands of years, medical professionals and those that focus on natural medicine are just now agreeing that this is one of the most beneficial natural substances when it comes to optimizing the health. In the year of 1988, a medical doctor from the School of Medicine at UCLA named Larry C. Ford led an experiment that concluded that when agents such as bacteria, viruses and fungi were subjected to simple forms of metallic based silvers, they were destroyed – within only minutes. In further studies, it has been established that when a colloidal silver generator is used to place silver in a colloidal form, the enzyme that all forms of bacteria, viruses and fungi that are one-celled use to metabolize oxygen is immediately destroyed; therefore, suffocating these potentially dangerous organisms. Conclusion Each day, we are subjected to millions of germs. While many of these germs are bacterial in nature, others are viral. Then, there are those that are considered to be fungal in nature. Germs are in just about every single aspect of our environment – the air, in foods, on plants, in water and on the body. While it is true that our immune systems have the ability to protect us from most of these infectious agents, there are numerous germs that may penetrate through our body’s defense system and make us very ill. Examples of common illnesses that occur as a result of these infectious agents include strep throat, influenza, measles, yeast infections and athlete’s foot. By using a colloidal silver generator [...]

What you need to know about Colloidal Silver

admin — Sat, 17 Mar 2012 12:48:04 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. What you need to know about Colloidal Silver - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

What is Colloidal Silver? In order to understand the basic functionality of a colloidal silver generator and the health benefits associated with colloidal silver, you must first have a detailed understanding of what colloidal silver is, in general. If you are reading this, it is quite likely that you already have an understanding of the fact that silver is a type of metal. In order to start explaining what colloidal silver is, we will start with a basic explanation of the word “colloidal”. When an object is identified as being “colloidal”, it indicates that it is composed of extremely small particles that are considered to be a bit larger than standard molecules. These particles do not dissolve like other particle based substances. Instead, they remain suspended in the type of matter that they are combined with – such as a solid, a gas or a liquid. The actual term “colloidal” comes from the Greek word, “Kolla”. The actual meaning of the word is “Glue”. According to research conducted on colloidal silver, the substance is highly effective in ensuring that the organs in the body function appropriately. Digestion, for example, is optimized by the use of silver created using a colloidal silver generator. When used to optimize an individual’s health, colloidal silver is suspended in water that is considered to be pure by extremely small amounts of a special electrical charge that are put off by the colloidal silver generator. These results in the silver particles becoming active and assists in their suspension without having to use artificial based stabilizers and/or additives. The quality of the silver produced by the colloidal silver generator is displayed through colors. These colors are yellow, brown, red, gray and black. The highest quality colloidal silver particles are typically a very light yellow color. The products generated by the colloidal silver generator are capable of disabling a special enzyme that is responsible for oxygen production in organisms that are considered to be one-celled. Examples of these organisms include various types of viruses, bacteria and an assortment of fungi. When these one-celled organisms are unable to effectively metabolize their oxygen, they are immediately destroyed. Once these infectious pathogens are destroyed in the body by the colloidal silver, there are several different systems in the body that work to eliminate the debris from the body. These systems include the immune system, the digestive system and even the lymphatic system. While antibiotics work in a similar manner, it has been established that pathogens have the capability of developing a type of resistance to antibiotics. This is why so many individuals are starting to purchase and use a colloidal silver generator – because the harmful pathogens that colloidal silver do not develop a resistance to the small metal particles.

Some essential uses for Colloidal Silver

admin — Fri, 16 Mar 2012 19:24:59 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. Some essential uses for Colloidal Silver - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

Colloidal Silver Uses Numerous individuals have utilized a colloidal silver generator in the past century to create colloidal silver particles to be used in foods and medications in order to strengthen the body and optimize the health of the body as a whole. There have been several claims regarding the effectiveness of colloidal silver throughout the years by scientists, researchers, doctors and other individuals that have dedicated a great deal of time in studying the effectiveness of the silver particles created by the colloidal silver generator. During the early part of the 1900s, this form of silver was considered to be an effective product for preventing infections in the body. While the substance was used heavily as an antibiotic treatment by medical doctors prior to the year of 1938, its popularity diminished a bit immediately thereafter. However, in recent years, it has regained much of its original popularity. In this guide, you will learn about some of the most common colloidal silver uses today. Today, silver is utilized in many scientific ways. For examples, individuals in the Soviet Union use this metal to sterilize the water that goes through the process of being recycled on the stations that they have in space. The organization known as “NASA” has researched numerous methods of purifying their water. In the end, they established that utilizing a system on the space shuttles that incorporates the use of silver is the most beneficial and healthiest form of purifying a water supply to their spacecraft. In addition to this, there are multiple major airlines that utilize water filters composed of silver that will allow them to protect their passengers from certain types of potentially devastating diseases, such as one that is identified in the medical field as “Dysentery”. While these scientific uses for silver are relatively impressive, most individuals that are interested in acquiring a colloidal silver generator to create particles of colloidal silver are interested in using the substance in order to benefit them health wise. Individuals that use this type of silver have found that they experience fewer sicknesses, infections and other types of health conditions. This is due to the fact that colloidal silver from a colloidal silver generator has the ability to eliminate the oxygen source from potentially dangerous infectious pathogens such as bacteria, fungi and viruses. Once the oxygen source is eliminated from these pathogens, they quickly die off. Immediately thereafter, the body eliminates the pathogens from the body so that they do not result in diseases and other types of sicknesses. As you can see, there are many colloidal silver uses. However, on the most part, individuals elect to obtain a colloidal silver generator in order to optimize their health and build up their body’s natural defense system.

Colloidal Silver Uses in Liver Cirrhosis

admin — Sun, 11 Mar 2012 00:40:45 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. Colloidal Silver Uses in Liver Cirrhosis - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

Many consumers are now starting to purchase a colloidal silver generator in order to create colloidal silver products that will assist in optimizing their overall health. While it is true that retailers that specialize in homeopathic remedies typically carry a large number of products that contain traces of colloidal silver, the economically conscious consumers have discovered that it is much more cost efficient to purchase a colloidal silver generator and create their own health remedies. In addition to saving money, these individuals have also found that they are able to create products that contain larger amounts of the specialized silver than those sold in stores. Based on studies performed by researchers and homeopathic specialists, it has recently been concluded that individuals that suffer from liver cirrhosis may benefit from the use of silver that is identified as being colloidal. In this guide, you will learn about the uses of this silver in patients that have cirrhosis of the liver. What is Liver Cirrhosis? In order to acquire an understanding of how natural substances, such as colloidal silver, benefit those that have been diagnosed with cirrhosis of the liver, you must first acquire an understanding of what liver cirrhosis is, and how it impacts the body. By having an understanding of this condition, you will be better able to appreciate the benefits associated with a colloidal silver generator. When a person is diagnosed with this serious medical condition, it indicates that there is scarring somewhere on the liver. It also indicates that the individual has a poor level of functioning within the liver. This is the final result of chronic based damage to the liver that was caused by one of the chronic diseases associated with the liver. Examples of health problems that cause liver cirrhosis include Hepatitis C, Nonalcoholic Fatty Liver Disease, abuse of alcohol, disorders that are metabolic in nature and even unfavorable side effects from certain types of medications. What is Colloidal Silver? Colloidal silver is a substance that is created by immersing small particles of silver in water that is distilled. The colloidal silver generator that is used to create the substance emits a very small charge that is electrical in order to appropriately form the substance. Individuals that utilize this natural substance typically ingest it in one form or another. It has the ability to pass quickly through the gastrointestinal tract, and then, into the blood. Once the substance is situated within the body, it has the ability to optimize the health in numerous ways. Examples include strengthening the body’s immune system and preventing infections from developing from settling within the body. Liver Cirrhosis Benefits A colloidal silver generator creates a substance that numerous liver cirrhosis patients take in order to strengthen their immune system. The particles that are contained in colloidal silver products are extremely small, yet pack a powerful punch when it comes to reducing symptoms that are commonly associated with liver cirrhosis, and preventing infections that may [...]

Will the water show signs of action when making colloidal silver?

admin — Mon, 13 Feb 2012 13:45:17 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. Will the water show signs of action when making colloidal silver? - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

The best quality colloidal silver is produced by the electro-colloidal or non-chemical method. This process creates a truly homogeneous solution of super-fine silver particles, around 0.005 - 0.015 microns in diameter, that are suspended in water without the need of a chemical stabilizer, dye, or any other ingredient. Electro colloidal silver is produced through electrolysis, when an electrical current is passed through an electrolyte containing two silver electrodes. Many people are now using a simple silver colloidal generator to produce large quantities of colloidal silver at home. In a colloidal silver generator water always acts as the electrolyte. The amount of action shown by the water during the process depends on three things: the type of water, any additives, such as salt, added to the mixture and the strength of the current being passed through the electrolyte. When using tap, filtered or mineral water in the process, cloudy white streams will quickly begin emanating from the silver rods. This is not, as is often believed, colloidal silver being formed, but a result of impurities in the water. Salt introduces chloride ions into the water which react with the silver to form silver chloride. The high levels of activity seen are also due to the increased levels of conductivity in the water. Indeed, until recently, a number of practitioners advocated adding salt to the water to increase its conductivity and thus reduce the time taken to complete the process. However, a high reaction speed will create large particles of silver, thereby reducing their rate of absorption into the body. Pure distilled water is therefore the preferred electrolyte. When using distilled water no visible reaction is noticed at first, although an electrolysis reaction begins, and electrons start moving between the two rods as soon as they are introduced. This is due to the very low semiconductor quality of distilled water that only allows for a small movement of electrons between both rods. It is this movement of electrons between the silver rods that sinters off the silver into the water; therefore, the lower conductivity slows the reaction. This is ideal, as keeping the reaction speed to the bare minimum produces only the smallest particles of silver. As the process continues a small discoloration will be seen on both rods. On the negative rod, neutral silver, that is silver that has no charge, will begin to form. On the positive rod a dark brown substance may begin to form. This is silver oxide, and while harmless, large flakes are an undesired addition to the final product. To reduce this, only the highest quality pure silver wire should be used. Near the end of the process small bubbles will begin rising from the negative rod, this is a simple and harmless hydrogen gas. At the end of the process an ultra fine silver cloud solution begins to peel off the positive rod, as soon as the solution around the rods is mildly cloudy, the [...]

What is the cause of big particles in colloidal silver?

admin — Fri, 10 Feb 2012 13:34:10 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. What is the cause of big particles in colloidal silver? - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

The particle size of colloidal silver is important for two main reasons: Firstly, smaller particles are more likely to be absorbed by the body in a useable form. To be effective, colloidal silver particles should be small enough to be absorbed under the tongue and through lung tissue. Secondly, the size of the particle has a direct effect on its surface area. The particle surface area of a colloid is the key factor in determining its effectiveness. The greater the surface area of colloids exposed to the areas of interest; the more effectively the particle will interact with its environment. The surface area of colloidal particles actually increases as the particle size decreases. For example, if the amount of silver in a silver dollar was rendered into 1nm particles, the surface area would be equal to 4.115 million times the surface area of the original dollar. So it becomes clear the smaller the particle size and the larger the quantity of the silver colloids, the greater the surface area will be and the more effective the treatment will become. To ensure that particle size is controlled, a great deal of care must be taken when using a colloidal silver generator. The electric current passing through the liquid must be kept at low voltage in order to adequately sinter the silver from the electrified source. As the voltage becomes too high, greater amounts of silver are stripped from the source too quickly. The process speeds up, and as the process speeds up, the particle size increases. Distilled water helps keep the electrical current low as it acts as a fairly good insulator, and has a fairly strong resistance to electron flow. However, as the silver particles and ions start to accumulate, the resistance of the water decreases. The reason for this is as follows. As the silver is stripped away during the process, it becomes ionized and dissolves into the water. To become ionized simply means to take on an electrical charge. As the ions dissolve into the water, the water becomes more and more conductive, the current then increases, and the whole process speeds up. Some of the ions are able to attach themselves to each other, and by doing so, cease to be ionized. As the current increases and the process speeds up, the silver particles are stripped from the electrodes in greater numbers. The particles become larger and are able to attract more and more ions. Once clumped together, as they no longer carry an electrical charge, they are effectively just pieces of silver floating in the liquid. The process will continue accelerating until the particles become too large to remain in suspension and fall from the liquid as sediment. If your colloidal silver generator has a fixed voltage, this can be a problem and the timing of the process becomes crucial to both the size of the silver particles and their concentration within the batch. There are a number [...]

Items needed to make homemade colloidal silver water

admin — Wed, 08 Feb 2012 13:28:23 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. Items needed to make homemade colloidal silver water - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

There are a number of reasons to make your own colloidal silver, but the main one for most people is cost. A typical 4-oz. bottle of colloidal silver can cost around $30, but to make your own can end up costing only a few cents per quart. Once the initial outlay on a high quality colloidal silver generator is made, the only costs incurred thereafter will be the distilled water at around a dollar a gallon and around $25 every few years replacing the supply of pure silver wire. In fact once up and running, making silver colloidal at home can cost as little as 36 cents a quart. Making your own colloidal silver also gives you more control over the purity and quality of the solution. Recent tests have shown that only around 43% of bottled colloidal silver actually contained the concentration listed on the label. Many products may also contain dyes, stabilizers, proteins or other additives. There is also no way of knowing the true particle size, even when listed on the label; as this is often an exaggerated or arbitrary figure. To make colloidal silver yourself you will need: a colloidal silver generator, pure silver wire, distilled water and a brown glass jar or bottle for storage. Colloidal silver generators can be made at home relatively simply. All that is needed is a small power supply or four 9 volt batteries, pure silver and a glass container. The optimal voltage for the reaction is 30 volts, however if using batteries it is best to start at 36 volts and let them run down. Two strips of pure silver wire are then attached to the power supply, one to be positively charged and one negatively charged. The silver should then be suspended in distilled water contained in a wide mouthed glass jar or container. It is critical that the container is made of glass and not plastic, as plastic may create a static charge which could interfere with the ionization process. While these basic homemade generators will produce colloidal silver, the end product will invariably be of a lower quality than that produced by one of the new high tech generators available today. This new breed of colloidal silver generator controls the timing, voltage level and the agitation of the water during all stages in the process to guarantee both consistent size and a correct concentration of silver particle in the final product. It is vitally important to control the purity of the water as this is one of the main factors determining the particle size in the finished product. Only the highest quality distilled water is acceptable in the process. Spring and filtered water will still contain too many dissolved minerals that will interfere in the process, and deionized water does not conduct electricity sufficiently to start a reaction, so should also be avoided. The other vital ingredient in the quality of the final product is the silver. Only pure [...]

How colloidal silver benefits the liver

admin — Mon, 06 Feb 2012 20:26:13 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. How colloidal silver benefits the liver - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

Colloidal silver and how it works. True colloidal silver is formed by microscopic silver particles being suspended in, commonly, distilled water by a small electrical charge. It is available to buy from many natural health stores in liquid or spray form. Alternatively, it can be produced easily and cost effectively at home using a colloidal silver generator. The microscopic colloidal particles are able to pass quickly through the digestive system and into the blood stream. Once a level of colloidal silver is established in the body, it has been shown to greatly strengthen the immune system, prevent infections and act as a powerful natural antibiotic. If any single celled pathogen, such as a virus, fungus or bacterium, then tries to enter the same space occupied by the silver colloid particles, its oxygen metabolism enzyme quickly becomes disabled. The pathogen then suffocates and dies within minutes and may be safely removed from the body. How colloidal silver benefits the liver The liver is one of the most important organs in the human body. It secretes more than 4,000 enzymes, protects the body from infection and removes toxins from the blood stream which can then be exhumed from the body. Good liver function is, therefore, vital to the general wellbeing of the body. Inflammation, or hepatitis, can lead to a weakened immune system, the onset of a number of diseases and numerous adverse effects on the functions of other organs in the body. Colloidal silver has also been shown to kill bacteria and viruses that cause liver disease. Regular consumption, usually one teaspoon a day is recommended, can strengthen the body’s defenses and prevent infection. While in the event of the liver becoming infected, it is recommended that the dosage is increased to around 3 tablespoons a day until the infection is brought under control. Colloidal silver and Hepatitis C One of the leading causes of liver disease is the HCV or Hepatitis C virus. This virus causes inflammation of the liver, restricts proper liver function, and if left untreated can cause severe and permanent liver damage. Hepatitis in the liver can also lead to cirrhosis and is a one of the primary causes of liver cancer. Current treatment of chronic hepatitis C infection consists of taking specialist anti viral medications peginterferon and ribavirin. However, these drugs have been shown to have strong adverse effects on the body, along with being prohibitively expensive for the patient. Many natural healers are advocating the anti-viral properties of Silver colloidal as an alternative means to control the symptoms associated with Hepatitis C. While there is still no known cure, and as yet have been no extensive medical trials on the use of colloidal silver in the treatment of hepatitis C, there is strong anecdotal evidence to show the viral count in chronic patients may be reduced dramatically by regular colloidal silver usage. Many patients have experienced significant reductions in their viral count, and tell of being alleviated [...]

The benefits of breathing silver

admin — Sat, 04 Feb 2012 22:23:52 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. The benefits of breathing silver - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

Colloidal silver is commonly taken orally or through nasal sprays, but an alternative form of delivering colloidal silver to the body is by administrating it through a nebulizer. A nebulizer is a piece of medical equipment that converts liquid into a fine mist that can then be inhaled through a mouthpiece or mask. Using a nebulizer to breathe colloidal silver helps to ensure that only the smallest particles will pass into the body. These particles will also be introduced directly into the lungs, and therefore distributed quickly into the bloodstream, cells and tissues. The lungs have around 750 square feet of surface area interlaced with pulmonary capillaries, which circulate the blood at about 9 liters per minute, making them the fastest and most effective way of getting the solution into the body. Bypassing the digestive system also ensures a greater amount of colloidal silver passes directly into the system. Colloidal silver delivered using this method has been shown to be effective in the prevention of upper respiratory tract infections such as colds, flu and pneumonia. These conditions are typically treated by doctors with prescription antibiotics. However, the limited effectiveness of these drugs along with the high costs, many unpleasant side effects and negative consequences of antibiotic resistance patters, have led to many people looking for a more cost effective and safer treatment. With the advent of colloidal silver generators and simple home use nebulizer kits, large quantities of colloidal silver can now be produced at home, and the well documented antibacterial and germ fighting qualities may be administered directly to the infected areas at a fraction of the cost of expensive prescription drugs. Inhaling colloidal silver also carries with it none of the harmful side effects of prescription antibiotics such as nausea, fever, diarrhea, and a weakened immune system. Many people are now using this method to introduce silver directly to the infected areas and thereby stopping serious upper respiratory infections in their tracks. The results have routinely been described as miraculous with countless online testimonials showing amazing results when used to fight a whole range of upper respiratory tract infections. Many patients have continued to use nebulizers long after their condition has been cured as they provide a faster and more effective method of introducing silver into the body. Although surprisingly little medical research has been carried out to validate these claims, a study carried out in 2009 by the Washington University School of Medicine showed that inhaling silver may be one of the most effective ways to treat pneumonia. A group of laboratory mice were infected with a form of bacterial pneumonia commonly found in humans. All the mice then inhaled nanoparticles once per day. For half these mice the nanoparticles contained silver carbine complexes (SCCs). The mice that were given SCCs were found to have significantly lower concentrations of bacteria in the lungs than those on the placebo inhalators. Even more significantly, the mice that had [...]

How to Make Homemade Colloidal Silver

admin — Tue, 15 Feb 2011 16:49:33 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. How to Make Homemade Colloidal Silver - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

A colloidal silver generator is surprisingly easy to make. All that is required for a homemade generator is a 9-volt battery, wire made from 99.9% pure silver, a glass of steam-distilled water and a pair of small wooden sticks (popsicle sticks are ideal). This colloidal silver generator will not make a huge amount of silver but it will provide enough for external use and is good for emergency situations. There are various schools of thought regarding colloidal silver. Those in the medical profession dismiss any notion that this metal solution is capable of curing the amount of illnesses its proponents claim. There are various companies that disagree and sell colloidal silver with the belief that it is effective against hundreds of bacterial strains. Setting Things UP Get two strands of silver wire and bend the ends with pliers. Tie the wire around the ends of the battery. These strands need to hang down from the battery and must not be allowed to touch. If they do, the battery’s power will quickly be drained. The next step is to take the two small wooden sticks and place them beside one another on top of the glass of water. The battery should be laid down flat on top of the sticks with at least four inches of wire (10cm) now submerged in the water. The purpose of the sticks is to keep the battery away from the water while still allowing the wires to remain in contact with the liquid. Again, ensure the wires are kept apart or else the whole process will be ruined. Assuming the wires are properly connected to the battery, electricity should start flowing through the wires once they are in contact with the water. This should result in tiny particles of silver forming in the water with an electrical charge suspending them. Making Silver After an hour, five ppm (parts per million) worth of colloidal silver will be produced. At this point, the battery should be taken off the wooden sticks so that the wires are no longer in contact with water. Stir the water with a plastic spoon so that the silver particles which have just been created are evenly spaced out. If the water used in the process is properly distilled, the silver solution should be clear in colour. A cloudy solution means that too many minerals were in the water. The silver wires may turn grey or black during the procedure. This is silver oxide and has formed because of the reaction between silver, electricity and water. Use a kitchen pad to clean the wires. Storage Pour the colloidal silver solution into a dark glass bottle with a cork or plastic lid. It is possible to purchase the necessary bottles online from specialist stores. Store the bottle in a cabinet away from heat and light. Exposure to light causes the colloidal silver to cease being suspended in the water and it also tarnishes the metal. The solution can also be [...]

Magic or Toxic? A Scientific Look at Colloidal Silver

admin — Tue, 15 Feb 2011 16:14:26 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. Magic or Toxic? A Scientific Look at Colloidal Silver - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

Colloidal silver has been marketed as something akin to a magic potion by organizations that specialize in the field of alternative medicine. They see it as an effective antibacterial supplement which is superior to modern day antibiotics. The one problem supporters of colloidal silver face is the fact that medical evidence does not support their lofty claims. Of course, accusations have been thrown around by those in favour of colloidal silver including suggestions that medical evidence which dismisses it was collected by those who have a vested interest in antibiotics. It has even been suggested that the amount of profit made by companies who manufacture synthetic drugs and doctors who prescribe them is a good enough motive to ignore alternative medicine. Companies who sell colloidal silver suggest that their product is easy to digest and is able to fight bacteria in a way synthetic drugs cannot. Explaining Silver There are dozens of different dietary supplements containing silver. It can be confusing to a consumer because there is colloidal silver, ionic silver and silver proteins amongst other forms of the metal within these supplements. This can make it difficult for customers to figure out what their supplement does for them. Yet silver is quite easy to understand. It has positively or negatively charged ions with three different positive charges. Only the singly charged ion is stable in the majority of solutions. Colloidal silver normally comes in the form of uncharged silver particles combined with positively charged ions which are suspended in solutions such as ionized water or saline. Most companies use vague labels which do not distinguish between the different forms of silver. Labelling a product “silver proteins” helps no one because it could be any combination of silver ions. Consumption of colloidal silver leads to silver ions being released in the body but no one knows at what rate this occurs. Good or Bad Bacteria? Companies that market colloidal silver suggest that its main benefits include fighting bad bacteria. Various experiments have found that silver particles enter the body and become attached to bacteria cells. The silver also stops bacteria from creating new protection which makes them even more open to attack from antimicrobial agents. Effectively, bacteria are unable to resist colloidal silver and become stronger which happens when synthetic drugs are used too often on a patient. However, a large hole appears in the colloidal silver theory. There is no evidence to suggest that the silver particles only attack harmful forms of bacteria. This means colloidal silver is capable of killing good bacteria just as easily as harmful strains. As this news damages the claims of colloidal silver companies, they skip the issue entirely or come up with vague solutions such as consuming live culture yoghurt one hour after taking colloidal silver. Apparently, this should create good bacteria in your system once more. The Side Effects of Colloidal Silver An extremely rare condition known as Argyria is caused by overexposure to silver. It [...]

The Hidden Dangers of Colloidal Silver

admin — Tue, 15 Feb 2011 15:50:28 +0000

The SilverLungs (pH) colloidal silver generator is a highly cost-effective silver generator that produces extremely small nano-sized particles of (0.9999) "pure" elemental silver as well as trillions of (0.23 nm) silver ions. The Hidden Dangers of Colloidal Silver - Buying and consuming silver solutions regularly can be quite costly and having the ability to create your own "on site" can be vital in times of need.

Colloidal silver has enjoyed an upsurge in popularity in the last twenty years with all sorts of claims being made regarding its health benefits. It is suggested that colloidal silver is superior to synthetic drugs because bacteria are unable to build up an immunity to it unlike manmade medications which have inadvertently increased the strength of certain bacterial strains. Yet amidst all the hyperbole about this product, extensive research seems to suggest that it is not the all-healing elixir it is commonly portrayed as. Silver Exposure We are all exposed to trace amounts of silver in the course of our everyday lives. Food, drinking water and air often contain miniscule amounts of silver which is not an essential mineral. It was used by ancient civilizations as a disinfectant and this process was carried on through to the 20th century. The advent of modern antibiotics spelled the end for colloidal silver as a chief means of fighting bacteria but various companies have been trying to suggest that it is superior to antibiotics since the 1990s in extensive marketing drives. False Claims Claims that colloidal silver can kill one hundred times more bacteria than synthetic drugs have been dismissed out of hand by the world’s health authorities. Most countries do not consider colloidal silver as being a safe way to treat illnesses. In fact, the American Food and Drug Administration has taken legal action against companies that advertise colloidal silver as a better way of defeating bacteria than antibiotics. Cynics and proponents of colloidal silver suggest that this is simply a way of governments to make extra money from antibiotics that do not work. Yet detailed scientific research has shown that colloidal silver is not the wonder cure it is claimed to be. Argyria In fact, there are numerous side effects attributed to excessive use of colloidal silver, the most serious of which is Argyria. Claims that it is impossible to overdose on silver appear to be false. As silver does not have a metabolic function, the minimal amounts that get into our body are removed through excretion. However, excessive intake can cause Argyria which occurs when silver gets caught and stored in the body’s internal organs. This causes the skin to turn grey. Argyria was common in the era prior to antibiotics when doctors routinely recommended nose drops which contained silver to patients. Discovery of Argyria soon caused physicians to cease prescribing this form of medication. It is extremely difficult to treat this condition, though laser therapy is available to those seeking restoration of their skin to its normal colour. However, there have been numerous cases where Argyria has become a permanent condition. Argyria is caused when colloidal silver becomes mixed with proteins. It is not known how much colloidal silver needs to be consumed in order for Argyria to occur but it has been concluded that the alleged benefits of the product are far outweighed by its side effects. Other Side Effects Arteriosclerosis is another negative [...]