The best quality colloidal silver is produced by the electro-colloidal or non-chemical method. This process creates a truly homogeneous solution of super-fine silver particles, around 0.005 - 0.015 microns in diameter, that are suspended in water without the need of a chemical stabilizer, dye, or any other ingredient.
Electro colloidal silver is produced through electrolysis, when an electrical current is passed through an electrolyte containing two silver electrodes. Many people are now using a simple silver colloidal generator to produce large quantities of colloidal silver at home.
In a colloidal silver generator water always acts as the electrolyte. The amount of action shown by the water during the process depends on three things: the type of water, any additives, such as salt, added to the mixture and the strength of the current being passed through the electrolyte.
When using tap, filtered or mineral water in the process, cloudy white streams will quickly begin emanating from the silver rods. This is not, as is often believed, colloidal silver being formed, but a result of impurities in the water. Salt introduces chloride ions into the water which react with the silver to form silver chloride.
The high levels of activity seen are also due to the increased levels of conductivity in the water. Indeed, until recently, a number of practitioners advocated adding salt to the water to increase its conductivity and thus reduce the time taken to complete the process.
However, a high reaction speed will create large particles of silver, thereby reducing their rate of absorption into the body. Pure distilled water is therefore the preferred electrolyte.
When using distilled water no visible reaction is noticed at first, although an electrolysis reaction begins, and electrons start moving between the two rods as soon as they are introduced.
This is due to the very low semiconductor quality of distilled water that only allows for a small movement of electrons between both rods. It is this movement of electrons between the silver rods that sinters off the silver into the water; therefore, the lower conductivity slows the reaction. This is ideal, as keeping the reaction speed to the bare minimum produces only the smallest particles of silver.
As the process continues a small discoloration will be seen on both rods. On the negative rod, neutral silver, that is silver that has no charge, will begin to form. On the positive rod a dark brown substance may begin to form.
This is silver oxide, and while harmless, large flakes are an undesired addition to the final product. To reduce this, only the highest quality pure silver wire should be used. Near the end of the process small bubbles will begin rising from the negative rod, this is a simple and harmless hydrogen gas.
At the end of the process an ultra fine silver cloud solution begins to peel off the positive rod, as soon as the solution around the rods is mildly cloudy, the process is finished.
Care should be taken not to overrun, as if left running, the brown silver oxide will begin to form in greater quantities and could contaminate the final product. There is also a point in the process when the speed of the reaction begins to produce large particles. For this reason timing and purity are vital elements in the process.
The color of the final product should be clear or a very light yellow, anything else is a clear sign of impurities or large particles in the solution. Great care should be taken if using a basic silver colloidal generator to avoid overrunning, and it is recommended to use one of the newer models with an automatic shut down feature.
Filed under Blog by . 
The particle size of colloidal silver is important for two main reasons: Firstly, smaller particles are more likely to be absorbed by the body in a useable form. To be effective, colloidal silver particles should be small enough to be absorbed under the tongue and through lung tissue. Secondly, the size of the particle has a direct effect on its surface area.
The particle surface area of a colloid is the key factor in determining its effectiveness. The greater the surface area of colloids exposed to the areas of interest; the more effectively the particle will interact with its environment. The surface area of colloidal particles actually increases as the particle size decreases.
For example, if the amount of silver in a silver dollar was rendered into 1nm particles, the surface area would be equal to 4.115 million times the surface area of the original dollar. So it becomes clear the smaller the particle size and the larger the quantity of the silver colloids, the greater the surface area will be and the more effective the treatment will become.
To ensure that particle size is controlled, a great deal of care must be taken when using a colloidal silver generator. The electric current passing through the liquid must be kept at low voltage in order to adequately sinter the silver from the electrified source. As the voltage becomes too high, greater amounts of silver are stripped from the source too quickly. The process speeds up, and as the process speeds up, the particle size increases.
Distilled water helps keep the electrical current low as it acts as a fairly good insulator, and has a fairly strong resistance to electron flow. However, as the silver particles and ions start to accumulate, the resistance of the water decreases. The reason for this is as follows. As the silver is stripped away during the process, it becomes ionized and dissolves into the water.
To become ionized simply means to take on an electrical charge. As the ions dissolve into the water, the water becomes more and more conductive, the current then increases, and the whole process speeds up.
Some of the ions are able to attach themselves to each other, and by doing so, cease to be ionized. As the current increases and the process speeds up, the silver particles are stripped from the electrodes in greater numbers.
The particles become larger and are able to attract more and more ions. Once clumped together, as they no longer carry an electrical charge, they are effectively just pieces of silver floating in the liquid. The process will continue accelerating until the particles become too large to remain in suspension and fall from the liquid as sediment.
If your colloidal silver generator has a fixed voltage, this can be a problem and the timing of the process becomes crucial to both the size of the silver particles and their concentration within the batch.
There are a number of techniques that can be used to prevent large silver particles from forming. If the mixture is stirred, it will disperse the ions, preventing them from coming together. Some new colloidal silver generators come with a mechanical or magnetic stirrer which will keep the problem under control. Alternatively, the use of a wooden spoon to agitate the mixture at regular intervals can be employed.
Thermal heating or bubbling carbon dioxide through the mixture have also been used to keep the ions apart. These methods both come with drawbacks however. Heating the water too much can in itself lead to increased particle size. While any apparatus used to introduce the carbon dioxide could inadvertently introduce dust particles or gasses from the tubing or pump.
 |
Natural Path Silver Wings Dietary Mineral Supplement, Colloidal Silver, 500 PPM, 4 fl. oz. / 120 ml See Reviews For This Product  |
DescriptionSince 1994, Natural Path / Silver Wings' has manufactured the superior quality and concentration colloidal silver on the market. We offer colloidal silver in strengths of 250 ppm and 500 ppm, which can be diluted to smaller parts per million, such as 10 ppm and 30 ppm ... Features
|
 |
Source Naturals Wellness Colloidal Silver, 30 ppm, 2 Ounce See Reviews For This Product |
DescriptionPantothenic acid is a member of the B-vitamin family, and is often referred to as vitamin B-5. Its bioactive form, coenzyme A, plays a role in many processes in the body, including the metabolism of proteins, fats and carbohydrates, the production of energy, and the synthesis of red blood cells and a key neurotransmitter, acetylcholine. Features
|
 |
MesoSilver ® 20 ppm Colloidal Silver 250 mL/8.45 Oz See Reviews For This Product |
DescriptionMesoSilver is .9999 pure silver nanoparticles in colloid form, a TRUE colloidal silver, which means predominantly silver particles NOT silver ions. The world's highest particle surface area. Up to 600 times greater than other products... Features
|
Filed under Blog by .
A colloidal silver generator is surprisingly easy to make. All that is required for a homemade generator is a 9-volt battery, wire made from 99.9% pure silver, a glass of steam-distilled water and a pair of small wooden sticks (popsicle sticks are ideal). This colloidal silver generator will not make a huge amount of silver but it will provide enough for external use and is good for emergency situations. There are various schools of thought regarding colloidal silver. Those in the medical profession dismiss any notion that this metal solution is capable of curing the amount of illnesses its proponents claim. There are various companies that disagree and sell colloidal silver with the belief that it is effective against hundreds of bacterial strains.
Setting Things UP
Get two strands of silver wire and bend the ends with pliers. Tie the wire around the ends of the battery. These strands need to hang down from the battery and must not be allowed to touch. If they do, the battery’s power will quickly be drained. The next step is to take the two small wooden sticks and place them beside one another on top of the glass of water.
The battery should be laid down flat on top of the sticks with at least four inches of wire (10cm) now submerged in the water. The purpose of the sticks is to keep the battery away from the water while still allowing the wires to remain in contact with the liquid. Again, ensure the wires are kept apart or else the whole process will be ruined. Assuming the wires are properly connected to the battery, electricity should start flowing through the wires once they are in contact with the water. This should result in tiny particles of silver forming in the water with an electrical charge suspending them.
Making Silver
After an hour, five ppm (parts per million) worth of colloidal silver will be produced. At this point, the battery should be taken off the wooden sticks so that the wires are no longer in contact with water. Stir the water with a plastic spoon so that the silver particles which have just been created are evenly spaced out. If the water used in the process is properly distilled, the silver solution should be clear in colour. A cloudy solution means that too many minerals were in the water. The silver wires may turn grey or black during the procedure. This is silver oxide and has formed because of the reaction between silver, electricity and water. Use a kitchen pad to clean the wires.
Storage
Pour the colloidal silver solution into a dark glass bottle with a cork or plastic lid. It is possible to purchase the necessary bottles online from specialist stores. Store the bottle in a cabinet away from heat and light. Exposure to light causes the colloidal silver to cease being suspended in the water and it also tarnishes the metal. The solution can also be stored in a plastic bottle but it has been proven that colloidal silver lasts longest when kept in a dark glass container.
A Warning
It should be noted that there are professional colloidal silver generators on the market which produce a premium quality solution. The above steps will create a crude batch of colloidal silver which will consist of larger than normal particles. If the silver wire used in this procedure is anything less than top quality, it could be extremely risky to consume the resultant colloidal silver. Homemade colloidal silver should only be created in an emergency and is not suitable for regular use. Excessive consumption could lead to various health problems such as Argyria which occurs when too much silver gets lodged in the human body.
Click Here To Make Your Own Colloidal Silver >>>
 |
Alternative Health & Herbs Remedies Colloidal Silver Generator See Reviews For This Product |
DescriptionNature's Natural Healer! Make your own colloidal silver water with our safe and easy generator. No assembly. Ready to use. Features
|
 |
Olympian Labs Colloidal Silver, 10ppm See Reviews For This Product |
DescriptionColloidal Silver Origin Features
|
 |
Atlasnova Colloidal Silver Generator-1 See Reviews For This Product |
DescriptionThe generator includes: 2 pieces of 4-inch 12gauge pure 9999 silver wire, 1 high quality terminal block from Germany, 1 printed circuit board, 1 special high efficiency low current red LED, 1 Scrubbing Pad (to clean the silver wires), 1 Atlasnova OEM red laser pointer (no batteries), and the Instructions for making colloidal silver information... Features
|
Filed under Blog by .
